TSP700II Series

High Speed Printing (Max. 250mm/sec), Label, Receipt and Ticket Printer

  • Capable of printing on thick paper and labels
  • Robust design with dustproof material inside
  • A range of connectivity options
  • Thermal Printers
  • POS
  • Ticket
  • Label
  • 58mm Thermal Paper
  • 80mm Thermal Paper

Features

Capable of printing on thick paper and labels

Capable of printing on paper from 0.065 mm to 0.15 mm thick. It can be used for a wide range of applications such as prescription labels, sample labels and address labels.

Robust design with dustproof material inside

The highly sealed design keeps dust and water out. The quiet, drip-proof and dust-proof printer.

A range of connectivity options

Capable of printing by AirPrint, direct printing from web or cloud based software by using various choice of interfaces.

If you would like to see information other than the above features, please refer to the “Others” section.

Dimensions(mm)

Specifications

Series TSP700II Series
Printer Method Direct Thermal Line Printing
Print Speed up to 250 mm/second
Receipt Per Minute throughput speed Up to 53 receipts per minute
(standard 20 line receipt)
Print Resolution
(vertical x horizontal)
203 x 203 dpi, 406 x 203 dpi
Print Density 7 step selection by memory switch or control command
Character Matrix 12 x 24 dots, 9 x 24 dots
Two Colour Print Capability Red & Black, Blue & Black
(special paper required)
No. of Columns 48/64 or 53/71 columns
(depends on Paper Width)
incl. 1st column print for lottery applications
Character Set ANK 95, 32 Int 128 Graphic
International Code Pages Star Mode = 40. ESC/POS= 6 & 1 Blank allowing an additional character page to be added
Barcodes 9 versions / PDF 417, QR Code
(Maxicode Option Pending)
Line Spacing 3mm or 4mm + Programmable
Paper Feed Speed up to 250 mm/second
Paper Specifications: Width 80 mm standard. 82.5 & 58 mm also available by simply moving installed paper guide
Weight 0.065–0.15 mm / 63–150 gsm
Roll Diameter 100 mm
Easy-Load Drop-In & Print
Paper End / Black Mark Sensor Standard
Near End Sensor Two sensors for horizontal and vertical use
Maximum Print Width 80 mm paper = 72 mm, 82.5 paper = 80 mm, 58 paper = 52 mm
Top Margin 13 mm default (3 mm selectable via Memory Switch)
External Straight Paper Feed Path Standard
Autocutter (guillotine) Full or Partial cut selectable
(Leave centre point)
Logo Store 2 Mbit Flash ROMs with graphic management software
Emulation Star Line Mode, ESC/POSTM
Flash ROM 16Mbits
Interface versions Serial, Parallel, USB, Ethernet, Bluetooth®
Emulation Star Line Mode, ESC/POS™
Peripheral Drive Circuit 2 circuits, (24 V Max. 1 A) 1 Compulsion input
Power Consumption Operating / Waiting – Average 1.8 / 0.15 A
Operating Conditions:
Temperature 5–45°C
Humidity 10–90%RH (without condensation)
Storage Conditions: Temperature -20–60°C
Humidity 10–90%RH
Dimensions (W x D x H)/Weight
*without interface cover
147 x 213 x 148 mm / 1.75 kg
Safety Standards UL, C-UL, TÜV, FCC, VCCI, EN55032, CE, Gost
Reliability Printer 60 million lines (MCBF)
Autocutter 2 million cuts
Options Splash Proof cover
Parallel/Serial/Ethernet/USB Interface
Wall & Vertical Mount Kits
(Basic wall mount kit supplied with printer)
Buzzer

Related Contents

Accessories/Options

Accessories

Cable Cover

Holding plate

Shaft

Roll stopper

Switch cover

The included accessories vary depending on the model.

Options

Splash-proof Cover
『SPC-T700』

Wall Bracket "WB-T700"

Buzzer "BU01-24-A"

Power Supply
"PS60A-24B1 Adapter Set"

Interface Option
Parallel, Serial, Ethernet, USB

Vertical Stand "VS-T700"

Compatible software

Other

"Drop-In & Print", easy paper loading. Literally drop a roll of paper into the printer, close the lid and the paper is loaded!

Two colour output for emphasis purposes using specialist two colour paper

New splash resistant design with easy-clean curves for robust kitchen / bar use

Compact footprint in either horizontal or vertical mode

Compatibility with the majority of operating platforms with a quality suite of drivers including Microsoft WHQL certification for the TSP700II using the USB interface for seamless integration

Featuring well-known Star reliability and support with an MCBF of 60 million lines

StarwebPRNT Support

Enables printing from Web-based applications via HTTP requests
(StarwebPRNT I/F model)
(Bluetooth® I/F model via StarwebPRNT Browser)

Apple MFi Certified (Bluetooth® I/F model)

Certified by Apple Inc. for all iOS devices including: iPad, iPhone, iPod

Compatible with Various OS Environments

Offering printer drivers for Windows, Mac OS and Linux.
StarIO facilitates developers in easily designing mobile applications without complicated communication control on diverse operating systems like Windows Mobile, Windows CE, iOS (iPhone, iPad, iPod) and Android

(Note)
*All company and product names are trademarks or registered trademarks of their respective owners.
Trademarks

Contact Us

Questions & Inquiries

Download